华北克拉通南缘石炭系本溪组铁-铝黏土矿物质来源: 以河南三门峡大安铝黏土矿床为例^*          下载免费PDF全文

刘学飞  王庆飞  马遥  李中明  赵利华  周智慧  刘百顺  马欣莉 《古地理学报》2020,22(5):965-976

华北克拉通在中奥陶世至晚石炭世期间一直出露地表,经历了长期的风化作用,形成大规模的铁-铝黏土矿,其成矿物源一直是研究的热点,尤其是本溪组底部铁矿和铁质黏土矿与上部铝黏土矿是否为同一来源尚未查清。本研究选取克拉通南缘大安铝黏土矿床作为研究对象,展开微区矿物及元素地球化学组成分析,进一步探讨铁-铝黏土矿物质来源。大安矿床内含矿岩系自下而上包括铁质黏土岩、铝土矿、铝质黏土矿;局部喀斯特高地缺失铝土矿,铝质黏土矿直接覆盖于铁质黏土岩之上。铁质黏土岩在洼地以菱铁矿、黄铁矿和伊利石为主,在隆起区以赤铁矿、伊利石和高岭石为主。铝土矿以硬水铝石、伊利石和锐钛矿为主;铝质黏土矿主要矿物为伊利石。矿物微区分析在黏土矿底部发现大量的碳化硅和少量自然硅、硅铁矿、铬铁矿;区域对比揭示北秦岭造山带内商丹缝合带和二郎坪群中的蛇绿岩为铝黏土矿形成提供了成矿物质。本溪组底部铁质黏土与上部铝黏土矿稳定元素比率(例如Zr/TiO₂、Hf/TiO₂、Nb/TiO₂、Ta/TiO₂)存在明显差异,揭示二者为不同来源: 底部铁质黏土岩和铁矿层为底板碳酸盐岩原地风化的产物;而上部铝黏土矿是异地搬运物,北秦岭造山带在晚石炭世的整体抬升为华北铝黏土矿形成提供了重要的成矿物质。  相似文献   

Deep gold mineralization features of Jiaojia metallogenic belt,Jiaodong gold Province: Based on the breakthrough of 3000 m exploration drilling     

《China Geology》2020,3(3):385-401

Recently, continuous breakthroughs have been made about deep gold prospecting in the Jiaodong gold province area of China. Approximately 5000 t of cumulative gold resources have been explored in Jiaodong, which has thus become an internationally noteworthy gold ore cluster. The gold exploration depth has been increased to about 2000 m from the previous <1000 m. To further explore the mineralization potential of the Jiaodong area at a depth of about 3000 m, the Shandong Institute of Geological Sciences has drilled an exploratory drillhole named “Deep drillhole ZK01” to a depth of 3266 m. Hence, as reported herein, the mineralization characteristics of the Jiaojia metallogenic belt have been successfully documented. ZK01 is, to date, the deepest borehole with an gold intersect in China, and constitutes a significant advance in deep gold prospecting in China. The findings of this study further indicate that the depth interval of 2000 m to 4000 m below the ground surface in the Wuyi Village area incorporates 912 t of inferred gold resources, while the depth interval of 2000 m to 4000 m below the surface across the Jiaodong area possesses about 4000 t of inferred gold resources. The Jiaojia Fault Belt tends to gently dip downward, having dip angles of about 25° and about 20° at vertical depths of 2000 m and 2850 m, respectively. The deep part of the Jiaojia metallogenic belt differs from the shallow and moderately deep parts about fracturing, alteration, mineralization, and tectonic type. The deep zones can generally be categorized from inside outward as cataclastic granite, granitic cataclasite, weakly beresitized granitic cataclasite, beresitized cataclasite, and gouge. These zones exhibit a gradual transitional relation or occur alternately and repeatedly. The mineralization degree of the pyritized cataclastic granite-type ore in the deep part of the Jiaojia metallogenic belt is closely related to the degree of pyrite vein development; that is, the higher the pyrite content, the wider the veins and the higher the gold grade. Compared to the shallow gold ores, the deep-seated gold ores have higher fineness and contain joseite, tetradymite, and native bismuth, suggesting that the deep gold mineralization temperature is higher and that mantle-sourced material may have contributed to this mineralization. ZK01 has also revealed that the deep-seated ore bodies in the Jiaojia metallogenic belt are principally situated above the main fracture plane (gouge) and hosted within the Linglong Granite, contradicting previous findings indicating that the moderately shallow gold ore bodies are usually hosted in the contact zone between the Linglong Granite and Jiaodong Group or meta-gabbro. These new discoveries are particularly significant because they can help correct mineralization prospecting models, determine favorable positions for deep prospecting, and improve metallogenic prediction and resource potential evaluation.  相似文献   

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type     

Li‐Juan Du  Bo Li  Zhi‐Long Huang  Jun Chen  Jia‐Xi Zhou  Guo‐Fu Zou  Zai‐Fei Yan 《Resource Geology》2020,70(1):28-49

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献   

烟台市牟平区姜格庄金矿地质特征及其找矿前景          下载免费PDF全文

隋岩刚  李新凤  李安琪  张磊 《山东国土资源》2018,34(2)

牟平-乳山成矿带是山东省重要的金成矿带,姜格庄金矿位于牟平-乳山成矿带东北部,米山断裂西侧。姜格庄金矿矿床成因为中低温岩浆热液金矿床,控矿构造以近SN向断裂构造为主。矿区内地表出露矿化蚀变带5个,圈定矿体5个,矿体多呈脉状、透镜状,成矿严格受矿断裂控制,产状与蚀变带一致,围岩为邱家单元片麻状黑云二长花岗岩,蚀变主要为硅化、钾化、褐铁矿化等。矿石矿物主要有黄铁矿、褐铁矿及黄铜矿,金矿物主要为自然金等。通过对矿体地质特征和分布规律研究,认为该区域断裂构造内具有较好的找矿潜力。  相似文献   

招平断裂带南段南墅金矿地质特征及成矿远景          下载免费PDF全文

王青  程东江  曹瑞  王汝杰  王帅  苏旭亮 《山东国土资源》2018,34(7)

南墅金矿床位于胶西北著名金矿成矿带——招平断裂带的南段,南北与下庄、山后金矿相邻,NW向断裂与招平断裂带在矿区北部交会,成矿条件十分优越。近年来青岛地质工程勘察院在该区勘查取得了新进展,在矿床深部新发现一个产状稳定金矿体,最大埋深约700m,探获金矿资源量规模达到中型,沿走向、倾向均未封闭,进一步勘查资源潜力较大。该文详细叙述了矿床地质特征,总结了矿体产出及矿化富集规律,分析了南墅金矿的成矿远景,提出了该区及招平断裂带南段金矿勘查的找矿建议。  相似文献   

新疆库车县盐水沟北铜矿床地质特征及成因探讨          下载免费PDF全文

刘传朋 《山东国土资源》2018,34(4)

盐水沟北铜矿区位于新疆库车县北部,其大地构造位置处于塔吉克-塔里木陆块区、塔里木陆块、塔里木北缘隆起、库车前陆盆地,区内构造活动强烈。铜矿床赋存于新近纪中新统康村组第一岩性段,矿体呈层状,严格受地层控制。区内共圈定10个铜矿体,矿石矿物主要为孔雀石、赤铜矿、水胆矾、自然铜等,矿体内无夹石,顶、底板围岩均为褐红色及浅红色粉质泥岩。该矿床为砂岩型铜矿床。  相似文献   

鲁西潘店地区矽卡岩型铁矿成矿规律初探   总被引：1，自引：0，他引：1       下载免费PDF全文

郝兴中  刘伟  臧凯  张学松 《山东国土资源》2018,34(7)

近年来,在鲁中隆起区西北部潘店地区的铁矿勘查工作取得了重大进展。该区发育有明显的航磁异常及航空重力异常,且具有"重磁同源性"特征;通过对航磁异常的分析,可分为李屯、潘店、大张和薛官屯4个次级磁异常。勘查工作表明,区内巨厚新生界覆盖层下发育有矽卡岩型铁矿床,总体表现为"地层、岩体和构造"联合控矿的特征,即铁矿体受控于奥陶纪马家沟群碳酸盐地层、中生代燕山晚期闪长岩体、以及地层与岩体接触处形成的各种类型(构造)接触带。区内铁矿体赋存位置多样,主要为接触带赋存式、断裂充填式、层间充填式、裂隙贯入式、捕虏体构造式等;其成矿时代为早白垩世(130~131Ma),与济南、莱芜、金岭地区矽卡岩型铁矿形成时代基本一致;铁矿物质主要来源于中—基性侵入岩体。在整体表现为具有(剩余)重力异常高值处、(化极)磁异常明显部位,以及高—低电阻率转换带的地段进行铁矿勘查工作较为有利。  相似文献   

老挝帕莱通铁矿床西矿段磁铁矿地球化学特征及其成矿意义     

孙策  彭惠娟  熊富浩  侯林 《矿床地质》2020,39(3):523-546

帕莱通铁矿床是老挝万象—呵叻中新生代盆地中最大规模的铁矿床,分为东、西2个矿段,西矿段为豆状、块状富磁铁矿矿体,东部则主要发育角砾状贫赤铁矿矿体。其中,西矿段主要产于新生代富铁质玄武岩中。文章对西矿段中豆状、块状磁铁矿进行了详细的野外地质调查和显微结构分析,发现块状磁铁矿具有细粒他形结构特征,豆状磁铁矿具有球粒同心圆状结构特征。对较为新鲜的磁铁矿进行电子探针(EPMA)以及激光剥蚀电感耦合等离子质谱(LA-ICP-MS)分析显示:帕莱通铁矿床磁铁矿TiO_2-Al_2O_3-MgO三角图落入岩浆岩区域;微量元素富集V、Ti、Cr、Co、Ni及Ga等元素,亏损Sr、Ba及Mg等不相容元素;w(Co)和w(Ni)较高,且较高的Ni/Co比值可以反映成因与深源物质;w(Ti)较高且Ni/Cr比值≤1,在Ti-Ni/Cr图中落入了热液型磁铁矿的范围;Ga-Sn图解表明磁铁矿属于斑岩型热液成因;(Ca+Al+Mn)-(Ti+V)或Ni/(Cr+Mn)-(Ti+V)成因判别图显示该矿床兼具Kiruna型和斑岩型矿床的特征;w(V)表明磁铁矿在较低氧化环境中形成;(Al+Mn)-(Ti+V)形成温度判别图表明磁铁矿形成温度处于300～500℃范围内。文章认为帕莱通铁矿床成矿物质主要源于岩浆演化作用形成的富铁流体,后期由于岩浆热液流体的交代作用,使得磁铁矿具有了热液成因的特征。岩浆型矿床类型在老挝及邻区分布较为广泛,研究帕莱通铁矿的成因,对于总结区域成矿规律,指导同类型矿床找矿预测具有重要意义。  相似文献   

鄂尔多斯盆地北部东胜地区侏罗系—白垩系钻孔数据库与三维地质模型          下载免费PDF全文

张天福  张云  程先钰  孙立新  程银行  周小希  王少轶  马海林  鲁超 《中国地质》2020,47(S1):220-230

随着砂岩型铀矿找矿工作的进一步开展，其对以往钻孔资料集成应用的需求尤为迫切。在煤田钻孔资料“二次开发利用”和“煤铀兼探”新方法、新思路的指导下，通过采集东胜地区钻孔资料属性数据，按照统一的标准和要求，将煤田、铀矿等类型的重要钻孔资料，通过整理、扫描、数据类型转换、录入和集成，建成了东胜地区侏罗系—白垩系综合钻孔数据库，实现了对多源钻孔数据的统一管理。该数据库共包含3个Access数据库和相应的成果图件。每个Access数据库均包含钻孔基本信息表、综合柱状分层表、岩性描述分层表、地层名称及代号表、地层颜色表、测井曲线数据表、测井曲线配置表和钻孔弯曲度测量数据表等8张数据表，分别详细记录了地质编录岩性信息、地层分层信息、岩石颜色信息、测井曲线信息、水文分层信息、钻孔样品采样信息、弯曲度测量信息等。通过应用实践，该钻孔数据库成果可实现连井剖面、含煤含铀目的层的顶底板标高、地层等厚图、砂体等厚图及含砂率图等重要基础地质图件的快速生成，从而提高数据的使用效率并为铀矿勘查及研究工作提供重要数据基础。  相似文献   

滇西镇康放羊山Cu-Pb-Zn多金属矿床流体包裹体和C-O同位素研究     

陈伟  邓明国  耿齐卫  管申进  孔志岗  贾祯  张海 《岩石矿物学杂志》2020,39(6):780-794

滇西镇康放羊山Cu-Pb-Zn多金属矿床是保山地块发现的首个富铜的铅锌多金属矿床。为探讨其成矿流体来源和矿床成因，对该矿床开展了流体包裹体和C-O同位素研究。结果表明，阶段Ⅱ主要发育富液相包裹体，均一温度和盐度（NaCl_eq，质量分数）集中在240～300℃和8.0%～18.0%；阶段Ⅲ以含CO₂和子矿物包裹体为特征，均一温度和盐度的两个峰值为360～400℃、16.0%～24.0%和240～320℃、4.0%～14.0%；阶段Ⅳ以富液相和纯液相包裹体为主，均一温度和盐度降低至220～340℃和8.0%～14.0%。C-O同位素分析结果（δ¹³C_V-PDB值为-5.88‰~-2.37‰，δ¹⁸O_V-SMOW值为8.18‰~12.79‰）显示成矿流体主要来源于岩浆热液，在迁移过程中受到围岩溶解作用的影响。综合研究认为，放羊山矿床阶段Ⅱ和阶段Ⅲ的成矿流体主要来源于大陆碰撞形成的中高温、中高盐度、富CO₂岩浆热液，在阶段Ⅲ晚期和阶段Ⅳ受到中低温、低盐度大气降水的影响；矿床为受构造控制明显的中高温热液矿床，预测在矿区深部有望找到矽卡岩型矿体。  相似文献